IQOS ILUMA i PRIME UAE is part of the IQOS ILUMA series, which represents a new generation of tobacco heating devices. Unlike preceding IQOS fashions, the ILUMA i PRIME features induction-primarily based heating, doing away with the want for a heating blade. It is designed exclusively for TEREA Smartcore sticks, which heat tobacco from within, turning in a clean and strong taste. This tool is designed for person customers who need to enjoy a heated tobacco enjoy with out smoke or ash, with fewer odors than traditional smoking.
Device Setup and Preparation
Before you begin using the IQOS ILUMA i PRIME, make sure your device is charged and you have TEREA Smartcore sticks ready. Here’s how to get started:
Charging the Device
- Initial Charge: Connect the IQOS ILUMA i PRIME to a power source using the provided charging cable. It is recommended to fully charge the device before the first use, which may take up to 90 minutes.
- Checking Battery Status: There is a LED indicator on the device that shows the battery level. Green means fully charged, amber indicates a partial charge, and red means it needs charging.
- Charging Tips: For optimal performance, avoid overcharging or completely draining the battery regularly. Aim to keep it between 20% and 80% charged when possible.
Powering On the Device
- Power Button: To turn the device on, press and hold the power button until the LED indicator lights up. You’ll see a white light if it’s ready for use, or an amber light if it needs to charge more.
Inserting and Using TEREA Sticks
The IQOS ILUMA i PRIME is designed to work with TEREA Smartcore sticks. These sticks are pre-filled and heated using the ILUMA’s induction heating system. Follow these steps:
Inserting the TEREA Stick
- Open the Cap: Slide open the cap on the top of the device.
- Insert the Stick: Place a TEREA Smartcore stick into the device with the tobacco end facing down. Push gently until it clicks into place.
- Start Heating: Press and hold the power button for two seconds to start the heating process. You will feel a vibration, and the LED indicator will pulse, signaling that the device is heating up. This takes approximately 20 seconds.
Inhalation and Experience
- Begin Using: When the device vibrates twice and the LED indicator becomes solid, it’s ready for use.
- Enjoy the Experience: Each session lasts approximately six minutes or 14 puffs, whichever comes first.
- End of Session: Near the end of the session, the device will vibrate to signal the final 30 seconds or two puffs.
Removing the Used Stick
- Open the Cap: Slide the cap open once more.
- Remove the Stick: Pull out the used TEREA stick and dispose of it safely. Never try to re-use a stick as it is designed for single use.
Device Controls and Operation
The IQOS ILUMA i PRIME has intuitive controls for easy operation. Here’s a quick guide:
- Power Button: Press once to check the battery level, press and hold for two seconds to start a session, and press and hold for five seconds to turn the device off.
- Battery Check: Tap the power button once to check the battery status.
- Session End Signal: The device will vibrate to signal the end of a session.
Charging the Device
To charge the IQOS ILUMA i PRIME:
- Connect to Power: Use the provided USB-C cable to connect the device to a power source.
- Charging Time: A full charge takes approximately 90 minutes.
- Battery Indicators: As the device charges, the LED will indicate progress, and it will remain solid green when fully charged.
Maintenance and Cleaning
Regular maintenance helps to keep your IQOS ILUMA i PRIME functioning optimally.
Cleaning Tips
- Avoid Manual Cleaning: The ILUMA series doesn’t require manual cleaning as frequently as earlier IQOS models due to the lack of a heating blade.
- Exterior Care: Wipe down the exterior with a soft, dry cloth to remove any dust or debris.
- Avoid Water: The device is not waterproof, so do not use water to clean it.
Automatic Cleaning Cycle
- Some ILUMA devices have an automatic cleaning cycle that activates periodically. Ensure your device remains charged and operational to facilitate these cycles.
Safety and Best Practices
To use the IQOS ILUMA i PRIME safely:
- Use Only with TEREA Sticks: Do not attempt to use other types of tobacco sticks, as they are incompatible.
- Avoid Excessive Force: Be gentle when inserting and removing TEREA sticks to prevent any damage to the device.
- Keep Device Dry: Avoid exposing the device to moisture to maintain its functionality.
- Store Properly: When not in use, keep the device in a cool, dry place away from direct sunlight.
Common FAQs
Q1: Can I use other tobacco products with IQOS ILUMA i PRIME?
No, the IQOS ILUMA i PRIME is designed exclusively for TEREA Smartcore sticks. Using other tobacco products can damage the device and void the warranty.
Q2: How often should I charge my IQOS ILUMA i PRIME?
The device should be charged daily or when the battery indicator shows a low charge. Keeping it between 20% and 80% battery is ideal for battery longevity.
Q3: Can I use the device while it’s charging?
No, for safety reasons, the device should not be used while charging.
Q4: What should I do if the device isn’t heating properly?
If your IQOS ILUMA i PRIME isn’t heating correctly, try charging it fully and restarting it. If issues persist, consult customer support.
Conclusion
The IQOS ILUMA i PRIME represents a new era of tobacco heating technology, delivering a satisfying experience with minimal smoke, ash, or odor. By following this guide, you can maximize the device’s performance and enjoy a consistent experience with TEREA Smartcore sticks. The sleek design and simple operation make it a convenient alternative for adult smokers, while the induction heating technology ensures a smooth flavor in every session. With proper care and usage, the IQOS ILUMA i PRIME can be a durable, smoke-free option.